Product Description
S11-M full-sealed oil-immersed power transformer developed by the Company has the advantages of low loss, low noise and high efficiency and can achieve good energy-saving effect and reduce pollution. Compared with common oil-immersed transformer, it is unnecessary for full-sealed transformer to be equipped with oil conservator and change in oil volume is automatically adjusted and compensated by elasticity of corrugated sheet of corrugated tank, and transformer is isolated from air to prevent and slow down oil degrading and insulation aging, enhance operational reliability,with normal operation and no maintenance.Product feature:
1. The transformer core is stacked by imported high-quality cold-rolled silicon steel sheet, which reduces no-load loss and no-load current greatly, and makes the core bound to ensure compactness of the core and reduce noise.
2. High-low voltage winding is wound with oxygen-free cooper, low-voltage winding of 500kVA and below adopts double layer cylinder structure, that of 630kVA and above adopts double helix and four helix structure,and high-voltage winding adopts multilayer cylinder structure.
3. Transformer winding connection adopts Dyn11 to reduce influences of harmonic wave on the power grid and improve power supply quality.
4. The transformer is of full-sealed structure to prolong the shelf life and avoid suspended core use andmaintenance.
5. The measured noise level is below the standard.No suspended-core inspection is needed for this series of transformer after normal transportation and relevant unloading parts can be installed immediately, test for acceptance items shall be performed and it can be put into operation after passing the test.
Service conditions:
1. Maximum ambient temperature: +40°C
2. Minimum ambient temperature: -25°C
3. Altitude: <1000m
4. Maximum monthly average relative humidity: 90%(20°C)
5. Installation site: installed on sites without fire,explosion hazard, serious pollution, chemical corrosionor violent vibration, indoor or outdoor.
Normal S11-M Series Transformer apply to the altitude below 1000m; the circumstance temperature between -25ºC and +40ºC.
Technical parameters:
1. Rated capacity: 20~2500kVA
2. Rated HV: 10~15 kV
3. Rated LV: 0.4kv
4. Frequency: 50Hz or 60Hz
5. Cooling methods: ONAN/ONAF
6. Tapping Range: ±5% ±2x2.5%
7. Phase: Single Phase or Three Phases
8. Connection Symbol: Yyn0 or Dyn11
Installation Instructions
Product Parameters
| Technical Parameters |
| Product Type |
Vector Group |
Rated voltage |
no-load
loss |
load loss |
no-load
currendt |
impedance
voltage |
Total weight(kgs) |
Mounting Dimensions |
Overall Dimensions |
| |
|
H.V(KV) |
Tapping range |
L.V(KV) |
(W) |
(W) |
(%) |
(%) |
Weight |
Oil-weight |
Gross Weight |
|
|
| 30 |
Yyn0
or
Dyn11 |
6
6.3
10
10.5
11 |
± 5%
±2x2.5% |
0.4 |
100 |
630/600 |
2.3 |
4 |
195 |
80 |
335 |
440*440*14 |
1010*540*1110 |
| 50 |
130 |
910/870 |
2 |
4 |
275 |
100 |
444 |
440*440*14 |
1080*630*1115 |
| 63 |
150 |
1090/1040 |
1.9 |
4 |
|
|
|
|
|
| 80 |
180 |
1310/1250 |
1.9 |
4 |
335 |
115 |
539 |
440*440*14 |
1150*635*1190 |
| 100 |
200 |
1580/1500 |
1.8 |
4 |
420 |
120 |
624 |
440*440*14 |
1180*640*1210 |
| 125 |
240 |
1890/1800 |
1.7 |
4 |
435 |
145 |
684 |
550*550*19 |
1290*650*1350 |
| 160 |
280 |
2310/2200 |
1.6 |
4 |
540 |
160 |
844 |
550*550*19 |
1330*655*1380 |
| 200 |
340 |
2730/2600 |
1.5 |
4 |
620 |
180 |
944 |
550*550*19 |
1390*660*1420 |
| 250 |
400 |
3200/3050 |
1.4 |
4 |
805 |
210 |
1114 |
550*550*19 |
1430*690*1460 |
| 315 |
480 |
3830/3650 |
1.4 |
4 |
880 |
230 |
1354 |
550*550*19 |
1520*770*1510 |
| 400 |
570 |
4520/4300 |
1.3 |
4 |
1010 |
265 |
1569 |
550*550*19 |
1570*810*1580 |
| 500 |
680 |
5410/5100 |
1.2 |
4 |
1215 |
280 |
1679 |
660*660*19 |
1610*870*1610 |
| 630 |
810 |
6200 |
1.1 |
4.5 |
1375 |
360 |
1989 |
660*660*19 |
1690*1040*1690 |
| 800 |
980 |
7500 |
1.0 |
4.5 |
1845 |
510 |
2684 |
820*820*19 |
2140*1050*2090 |
| 1000 |
1150 |
10300 |
1.0 |
4.5 |
2175 |
562 |
3099 |
820*820*19 |
2220*1120*2220 |
| 1250 |
1360 |
12800 |
0.9 |
4.5 |
3255 |
685 |
3709 |
820*820*19 |
2310*1180*2320 |
| 1600 |
1640 |
14500 |
0.8 |
4.5 |
3865 |
695 |
4509 |
820*820*19 |
2520*1560*2350 |
| 2000 |
2050 |
17820 |
0.6 |
5 |
4570 |
830 |
5350 |
820*1070*19 |
2620*1690*2550 |
| 2500 |
2340 |
20700 |
0.6 |
5 |
|
|
|
|
|
Company Profile
Xuzhou Pengcheng electric co., Ltd. is a high-tech enterprise engaged in the production, research and development and sales of transformers and supporting products. The company is located in one of the three metropolitan areas of Jiangsu Province, the national comprehensive transportation hub, East China's important science and education, culture, finance, tourism, exhibition, Jiangsu Province's important economy, commerce and foreign trade - Xuzhou city, Beijing-Shanghai railway and Longhai Railway in this intersection, transportation is convenient. The total investment of the company is 250 million yuan, and the registered capital is 108 million yuan. The company has 500+ employees, including: engineers 7 people; There are more than 110 intermediate technical personnel such as doctors and masters.
500kV and above, 220kV, 110kV, 35kV, 20kV, 6kV and other oil-immersed transformers (S13, S20, S22) Series: 500kV-220kV, 110kV, 35kV, 20kV, 6kV epoxy resin cast dry-type transformer (SC(B)12, SC(B)13, SC(B)14, SC(B)18) series; amorphous alloy oil-immersed distribution transformer (SC(B)H15, SC(B)H17, SC(B)H19 series ); YB prefabricated substation, ZGS type combined substation; photovoltaic power generation step-up transformer, high overload transformer, on-load voltage regulating transformer. The products have passed the National Electrical Appliance Quality Supervision and Inspection Center and obtained registered model filing certificates. The product has also passed the China Quality Certification Center Energy Efficiency Product and National Electric Energy Certification. The center's PCCC product certification has passed the GB/T 27922-2021 [Commodity After-sales Service Evaluation System] standard.
Since its establishment, Tianhong has always followed the business philosophy of "science and technology guide, service first, integritybased", insisting on taking the interests of customers as its own responsibility, and focusing on product research and development investment. We operate in strict accordance with the standards of the ISO9000 quality management system, strive for refinement, pragmatism, innovation and progress, and provide customers from all walks of life with excellent products and transformer solutions that meet the characteristics of each region. With advanced technology, superb equipment, superior quality, satisfactory service and good reputation, the company sincerely cooperates with users and seeks common development. We sincerely welcome people from all walks of life to come to our company to discuss cooperation and create brilliance together!
Production Equipmens
FAQ
Our Services:
1.Warranty period:3 years. Maintenance for lifetime. 1 year free replacement for quality problems.
2.Payment terms:30% T/T advance, the balance be paid before shipment.
3.FOB Qingdao/Lianyungang/Shanghai port.
Why choose us?
1.Professional transformer manufacture.
2.National high-technology enterprise.
3.Qualified STATE GRID SUPPLIER and SOUTH POWER GRID SUPPILIER.
4.ISO9001:2008, ISO14001:2004, GB/T28001-2011/OHSAS18001:2007
5.PCCC ENERGY CONSERVATION PRODUCT CERTIFICATE.
Ordering requirements:
1.Type,name, quantity.
2.Technical parameter:
1)Rated capacity.
2)Input&output voltage.
3)No-load loss and load-loss.
3.Any other specical requirements(if any)
Certifications
Contact
Audited Supplier 
){kind=link}